background image

 

 

 

SPARE PARTS/REPAIR 

 
We hope our products will last as long as possible to reduce the build-
up of electrical waste in the world.  
If any consumable parts need replacing, please check our website for 
stock availability and purchase. 
If our website does not have the parts listed, but you still need 
consumable parts, please contact our customer support to check 
availability and process your order. 
 
To order replacement parts, please go to www.nettadirect.com/parts. 
 
You will need PDC information from your product, user manual or 
carton box. Alternatively, go to our website and use search bar to find 
the parts available. 
You can also find this code on the back of this User Manual. 
For our Repair Service, please contact our customer support with email 
on [email protected] they will provide with more details of 
repair service with NETTA. 

 
 

DISPOSAL OF PRODUCT 

 

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF 
THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 
2002/96/EC. 

 

DISPOSAL: 

Please dispose of this product responsibly. This item 
cannot be disposed of with general waste. Please contact 
your local council authority for more information on how to 
dispose this product. If this product is disposed of with 
general waste, it will end up in a landfill and will leak 
hazardous substances into the groundwater 

– effecting 

our food chain.  

 

 

Summary of Contents for 103648


















Reviews: