background image

 

 

 

YOUR WARRANTY 

 
If you purchased with NETTADIRECT, or one of our authorised resellers, you 
will automatically enrol your warranty for 1 (ONE) year. You do not need to 
register again for your warranty. All warranties will be carry out our terms and 
conditions include warranty conditions you will find out from our website at 
www.nettadirect.com.  
 

PLEASE NOTE

: Consumable parts will not be covered by warranty. If a 

consumable part needs replacing, you need purchase separately from our 
website.

 

Please quote with your original proof of purchase (invoice) and name or 
delivery address, postcode, so we can locate you when you contact us for 
warranty. 

COPYRIGHTS 

 

NETTA and its logo including images and contents in this manual and website 
is copyrighted. All intellectual property rights belong to NETTA owner 
CONSUMABLE DIRECT LIMITED. 
ANY UNAUTHORISED USE, MODIFICATION or DISTRIBUTION of the 
NETTA logo, website image, and its contents (from website, manuals) will 
violate worldwide copyright, trademark and associated laws. 
We reserve the right to proceed with lawsuits to anyone who is found 
breaching our copyrights policy. For more details, please check our website 
copyright policy for more information. 

PRODUCT DEPENDENCY CODE (PDC) 

 

Your PDC is below: 
 
 
 
 
 
 
NETTA is a registered trademark of CONSUMABLE DIRECT LIMITED. 
Product Produced for CONSUMABLE DIRECT LIMITED M32 0JT U.K. 
 

Printed in China

 

PDC: PLD3040A 

SKU: 103648 

 

Summary of Contents for 103648


















Reviews: