netsys NVF-2400S, User Manual, Page: 123 / 164

NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8
122
4.4.7 Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding loops in switched networks.
When STP enabled, to ensure that only one path at a time is active between any two nodes on the network.
You can enable Spanning-Tree Protocol on web management’s switch setting advanced item, select enable
Spanning-Tree protocol. We are recommended that you enable STP on all NVF-2400S to ensure a single active path
on the network. ( Figure 4.98 )
You can view spanning tree information about the Root Bridge.
Figure 4.98 Root Bridge Information
You can view spanning tree status about the switch as the following screen. ( Figure 4.99 )
Figure 4.99 STP Port status