netsys NV-720 Series, User Manual

Page: 11 / 78

NV-720S ADSL2+/VDSL2 Wi-Fi USER’S MANUAL Ver. A.2
10
2.4 Connecting the Router
The router has four Ethernet ports which support connection to Ethernet operation. The devices attached to these
ports must support auto-negotiation /10Base-T / 100Base-TX unless they will always operate at half duplex. Use any of
the Ethernet ports to connect devices such as Monitor systems, Servers, Switches, bridges or routers.
Notes:
1. The (RJ11) Line port is used to connect the telephone that is connected to VDSL2 CO and CPE router
(Point-to-point solution).
2. The Slave device (CPE) must be connected to the Master device (CO) through the telephone wire. The Slave
cannot be connected to another Slave, and the Master cannot be connected to another Master.