netsys G.SHDSL.bis 3010E, User Manual

Page: 89 / 105

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2
89
4.9 Ping
Ping command can use to diagnose basic network connectivity of EFM modem. Move move cursor to ping
command and press enter.
The ping command sends an echo request packet to an address, and then awaits a reply. The ping output can
help you evaluate path-to-host reliability, delays over the path, and whether the host can be reached or is
functioning.
----------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
IP address <IP> : 10.0.0.1
Number of ping request packets to send (TAB select): -t
Data size [1~1999]: 32
----------------------------------------------------------------------
There are 3 parameters for ping command:
IP address: The IP addresses which you want to ping.
Number of ping request packed to send, key TAB for further selection
Default: It will send 4 packets only
1~65534: Set the number of ping request packets from 1 to 65534
-t : It will continuous until you key Ctrl+C to stop
Data Size: From 1 to 1999