- 92 -
F. MPIO and MC/S setup instructions
Here is the instruction to setup MPIO or MC/S. The following network
diagrams are the examples. Please follow them to setup the environment.
Remind that host must have multi NICs which are set up as different IPs.
Figure F.1
The MPIO setup instructions are in the following:
1. Create VG/UDV, and then attach LUN.
2. Add the first “Target Portal” on Microsoft iSCSI initiator.
3. Add the second “Target Portal” on Microsoft iSCSI initiator.
4. Logon.
5. Enable
“Enable multi-path”
checkbox. Then click
“Advanced…”
.
6. Select the first “Source IP” and “Target Portal” to iSCSI data port 1.
Then click
“OK”
.
7. Logon
again.
8. Enable
“Enable multi-path”
checkbox. Then click
“Advanced…”
.