Netstor NA622TB3, User Manual, Page: 6 / 23

6
Go Top ↑
2.3 Install the Stand
The NA622TB3 unit can be put horizontally or vertically for work.
4. After the completion of the M.2 SSD modules installation on the backplane,
insert the backplane plate back into the NA622TB3 storage, and tighten the
two thumbscrews at rear side.
1. Horizontal use:
Place the NA622TB3 enclosure horizontally on a level surface for application. It needs
to be noted that the side with the ventilation holes must be facing upwards for the
fine airflow dissipation. (see Image 1 below)
2. Vertical use:
Put the included stand at the rear bottom part of the NA622TB3 enclosure, and then
tighten the stand’s two thumbscrews to fasten the stand to the enclosure. After the
stand is fastened to the Netstor unit, you can then place the NA622TB3 enclosure
vertically on a level surface for work. (see Image 2 below)
1.
2. 2.
Image 1 Image 2
facing upwards