manualshive.com logo in svg

Netscape NETSCAPE DIRECTORY SERVER 6.02, Administrator'S Manual

Share
Download
Netscape NETSCAPE DIRECTORY SERVER 6.02 Administrator'S Manual Download Page 257

Compatibility with Earlier Releases

Chapter

6

Managing Access Control

257

To set the error log level from the Console:

1.

On the Console, click the Directory tab, right click the config node, and choose
Properties from the pop-up menu.

This displays the Property Editor for the

cn=config

entry.

2.

Scroll down the list of attribute value pairs to locate the

nsslapd-errorlog-level

attribute.

3.

Add 128 to the value already displayed in the

nsslapd-errorlog-level

value

field.

For example, if the value already displayed is 8192 (replication debugging),
you should change the value to 8320. For complete information on error log
levels, refer to Netscape Directory Server Configuration, Command, and File
Reference.

4.

Click OK to dismiss the Property Editor.

Compatibility with Earlier Releases

Some ACI keywords that were used in earlier releases of Directory Server have
been deprecated in Directory Server 6.02. However, for reasons of backward
compatibility, they are still supported. These keywords are:

•

userdnattr

•

groupdnattr

Therefore, if you have set up a replication agreement between a legacy supplier
server and a consumer Directory Server 6.02, you should not encounter any
problems in the replication of ACIs.

Summary of Contents for NETSCAPE DIRECTORY SERVER 6.02

























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands