Netscape NETSCAPE DIRECTORY SERVER 6.02 Administrator'S Manual Download Page 108

Page: 108 / 568

Creating and Maintaining Database Links

108

Netscape Directory Server Administrator’s Guide • May 2002

nsslapd-state: backend

nsslapd-backend: DBLink1

nsslapd-parent-suffix: "ou=people,dc=example,dc=com"

cn: l=Zanzibar,ou=people,dc=example,dc=com

In the first section, the

nsslapd-suffix

attribute contains the suffix on server B

that you want to chain to from server A. The

nsFarmServerURL

attribute contains

the LDAP URL of server B.

The second section creates a new suffix, allowing the server to route requests made
to the new database link. The

attribute contains the same suffix specified in the

nssalpd-suffix

attribute of the database link. The

nsslapd-backend

attribute

contains the name of the database link. The

nsslapd-parent-suffix

attribute

specifies the parent of this new suffix,

ou=people,dc=example,dc=com

Next, you create an administrative user on server B as follows:

dn: cn=proxy admin,cn=config

objectclass: person

objectclass: organizationalPerson

objectclass: inetOrgPerson

cn: proxy admin

sn: proxy admin

userPassword: secret

description: Entry for use by database links

Add the following proxy authorization ACI to the

l=Zanzibar,

ou=people,dc=example,dc=com

entry on server B:

aci: (targetattr = "*")(version 3.0; acl "Proxied authorization for

database links"; allow (proxy) userdn = "ldap:///cn=proxy

admin,cn=config";)

This ACI gives the proxy admin user read-only access to the data contained on the
remote server within the

l=Zanzibar,ou=people,dc=example,dc=com

subtree

only.

CAUTION

Do not use the Directory Manager user as the proxy administrative
user on the remote server. This creates a security hole.

Summary of Contents for NETSCAPE DIRECTORY SERVER 6.02

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NETSCAPE DIRECTORY SERVER 6.02

Reviews:

Brands by name

Popular brands

Netscape NETSCAPE DIRECTORY SERVER 6.02, Administrator'S Manual

Search results

Summary of Contents for NETSCAPE DIRECTORY SERVER 6.02

Reviews:

Brands by name

Popular brands