Netscape Certificate Management System 6.2, Administrator'S Manual

Page: 439 / 874

Setting Up Certificate Profiles
Chapter 10 Certificate Profiles 439
To add an input:
a.
Click Add.
The Certificate Profile Input Editor window appears.
b.
Choose the input you want to add from the list and then click OK. See
“Input Reference,” on page 443 for complete details of the default inputs.
The New Certificate Profile Editor window appears.
c.
Fill in the following fields:
Id. Type a name or identifier for this input.
d.
Click Ok.
This input will be listed in the input tab. You can edit it to provide values
to the parameters in this input.
To delete an input:
a.
Select the input.
b.
Click delete.
10.
Set up outputs in the Outputs tab of the Certificate Profile Rule Editor window.
You need to set up outputs for any certificate profile that uses an automated
authentication method, you do not need to set up outputs for any certificate
profile that uses an agent-approved authentication method. The outputs tab
lists inputs that have been set up for this certificate profile. You can add an
output or you can delete an output. You can select an output and then select
edit; but since the output has no parameters or other settings, there is nothing
to configure.
To add an output:
a.
Click Add.
The Certificate Profile Output Editor window appears.
b.
Choose the output you want to add from the list and then click OK.
The New Certificate Profile Editor window appears.
c.
Fill in the following fields:
Id. Type a name or identifier for this output.
d.
Click Ok.