MAN-VIDBALL REV0703A
NM-VIDB
ALL
NM-VIDB
ALL
NM-VIDBALL
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
DO NOT CUT OR SPLICE THE CAMERA’S CABLES. MODIFYING THE UNIT IN ANY WAY WILL VOID THE WARRANTY.
Installation Procedures:
1. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the camera’s Video
Connector. Adapters, such as BNC to F or RCA, may be used where appropriate.
2. Connect the 12V DC 300mA Power Transformer from an AC outlet to the camera’s Power Input Connector.
3. Mount the base to the junction box (not included) and adjust the camera assembly for proper viewing. When
satisfied, secure all adjustment points.
Figure 1 - Connecting the camera to a security monitor or standard television. Use the TV’s composite RCA Video In
jack and view through its video or line input. The picture will not be available on a channel.
Video Cable
Monitor
or
Television
Figure 2 - Connecting the camera to multiple pieces of video equipment. Every piece except the last must have a
loopback or video output jack.
Monitor
or
Television
Quad.
Sequencer
or
DVR
To Next
Device
Camera
Figure 3 - Connecting the camera to a modulator for whole house distribution and standard television viewing on
the modulated channel. The modulator can also be the last piece of equipment in Figure 2.
AMP
Main cable or
antenna
Modulator
Amplifier
Television
Television
Distribution
Panel
or Splitter
Splitter/
Combiner
Camera
Camera
