background image

NM-VIDB

ALL

NM-VIDB

ALL

MAN-VIDBALL     REV0703A

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Security Video Camera

NM-VIDBALL

Indoor Ball Camera

Elbow Bracket

Adjusts camera angle at Base 
Plate , screw, and Housing.

Camera Lens

Comes prefocused from 

factory but can be adjusted 

by rotating in either direction.

Base Plate

Supports power regulator and 
Video/Power Connectors. Mount 
to rectangular junction box.

Video Connector

Female BNC connector.

Power Connector

12V DC 300mA, center positive.

Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts to standard electrical fixtures
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty

Camera Lens: 

 

Image Sensor: 
Resolution: 
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:       

 

Power Requirement: 
Power Connector: 
Housing Size: 
Base Size:   

 

Mounting Holes: 
Weight:

FEATURES

Housing Cap

Remove to adjust focus.

Locking Ring

Secures elbow bracket to 
Base Plate at desired position.

Product Includes:

1.  Camera  Assembly  (Camera,  Housing,  Housing  Cap,  Elbow  Bracket,    

Locking Ring, Base Plate, Video Connector, Power Connector). 

2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting Screws.

This general purpose security camera mounts to a typical rectangular junction box and is viewed with 

a security monitor. To view the camera on a single standard television, use the TV’s composite RCA 

Video Input jack.

Female BNC, 75 Ohm

12V DC, 300mA

5.5mm OD, 2.1mm ID, center positive

2.33“ dia.

4.5” long x 2.75” wide

3.25” centers

1 lb.

(subject to change without notice)

3.6mm

1/3” CCD

350 lines

72˚ Horizontal

0.7 Lux F2.0

Yes

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

470 lines

72˚ Horizontal

0.3 Lux F1.2

Yes

Day/Night

 Color

Camera Assembly

Available in UV Paintable White

NM-VIDBALL-BW

NM-

VID

BALL-CW

White

NM-VIDBALL-HW

B/W camera          Color camera       Day/Night Color     Housing

SPECIFICATIONS

B/W

Color

Day/Night Color

B/W

Color

Summary of Contents for NM-VIDBALL

Page 1: ...ement Power Connector Housing Size Base Size Mounting Holes Weight FEATURES Housing Cap Remove to adjust focus Locking Ring Secures elbow bracket to Base Plate at desired position Product Includes 1 Camera Assembly Camera Housing Housing Cap Elbow Bracket Locking Ring Base Plate Video Connector Power Connector 2 12V DC 300mA Power Transformer Center Conductor Positive 3 Mounting Screws This genera...

Page 2: ... for proper viewing When satisfied secure all adjustment points Figure 1 Connecting the camera to a security monitor or standard television Use the TV s composite RCA Video In jack and view through its video or line input The picture will not be available on a channel Video Cable Monitor or Television Figure 2 Connecting the camera to multiple pieces of video equipment Every piece except the last ...

Page 3: ...ot expressly approved by NetMedia may void your authority granted by the FCC to use the product Failure to follow all installation instructions could void your FCC authorization to use the product in the USA Security Cameras FCC compliance requires that the Camera lens cover be fastened whenever the unit is in operation Compliance Information Statement Declaration of Conformity Procedure We NetMed...

Page 4: ...monitor A The composite video signal from the camera can be plugged directly into one television s RCA Video Input jack and viewed when that TV is switched to the proper input Another option is to feed the camera signal into a modulator A modulator such as NetMedia s MM70 changes the video to a UHF or Cable channel and allows the signal to be distributed to all your TV s along with the existing an...

Reviews: