29
Figure 4-3-13
If you select port to set ingress/egress rate, the system will automatically select integral multiple
of 16Kbps that closest to the rate you entered as the real ingress/egress rate.
Ingress: Configure the bandwidth for receiving packets on the port. You can select a port to set
Ingress rate, the system will automatically select integral multiple of 16Kbps that closest to the
rate you entered as the real Ingress rate.
Egress: Configure the bandwidth for sending packets on the port. You can select a port to set
Egress rate, the system will automatically select integral multiple of 16Kbps that closest to the
rate you entered as the real Egress rate.
4.3.8 Jumbo Frame
Due to tremendous amount of traffic occurring in Ethernet, it is likely that some frames might
have a frame size greater than the standard Ethernet frame size. By allowing such frames (called
jumbo frames) to pass through Ethernet ports, you can forward frames with a size greater than
the standard Ethernet frame size and yet still within the specified parameter range.
Choose the menu Configuration→ Jumbo Frame to load the following page.
