8
DECLARATION OF CONFORMITY (RED CE)
Manufacturer:
NETIO products a.s.
Address:
U Pily 3/103
143 00 Praha 4, Czech Republic
Product / type: 101
x
- where “
x
” define a socket/plug variant:
E
FR
F
DE
J
Swiss
S
IEC320
C13/C14
L
Italy
G
UK
H
Israel
T
IEC320
C19/C20
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
Object of the declaration: “Extension socket NETIO COBRA
controlled and monitored over the WiFi / LAN network”.
The object of the declaration described above is in conformity with the
relevant Union harmonization legislation:
NV 426/2016 Sb. including amendments
RED CE
(Radio Equipment Directive) - 2014/53/EU – including amendments
o
ETSI EN 300 328 V2.1.1, EN 62311:2008, ETSI EN 301 489-1 V2.2.0
o
EN
60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
References to the relevant harmonized standards used or references to the
other technical specifications in relation to which conformity is declared:
Article 3.1 a) Health and safety
Article 3.1 b) Electromagnetic compatibility
Article 3.2 Effective use of radio spectrum
Additional information:
Test Report No.: EZÚ 700026-01/06 of 31.1.2018
Test Report No.: EZÚ 700026-01/09 of 31.1.2018
RoHS:
The product mentioned above to which this declaration relates is in conformity with
the essential requirements and other relevant requirements of the Directive
2011/65/EU (restriction of the use of certain hazardous substances in electrical and
electronic equipment).
The product mentioned above is in conformity with the following standards and/or
other normative documents:
EN 50581: 2012
Czech Republic, Prague, 11.6.2018
Jan
Ř
ehák, Chief of the board
First configuration
(1)
AP mode
activation
Switch ON the device.
Press and hold the button for at least
10 seconds
while the device is on. You can use paper clip or
any metal sharp tool.
This activates the
AP mode
. (Yellow LED blinks guickly)
(2)
Connect to the
device
In AP mode the PowerCable works as a WiFi Access Point and
DHCP server.
Connect to the “
PowerCable-AP-xx
” where xx are last two
digits from serial number on the device label.
(3)
Connect device
do the WLAN
Open in your browser any IP address or “
10.0.42.1
”.
Select your local WiFi network and configure wifi password.
(4)
Note assigned IP
address
On the last page it will show you in red color assigned final IP
address.
(5)
Device web
configuration
Click to this address or open it in the computer.
Default username: “
admin
”, password: “
admin
”.
Download software
NETIO Discover
(for MS Windows or JAVA version)
https://www.netio-products.com/en/download
Factory defaults
Switch OFF the device. Press and hold the button for at least 10
seconds
while powering up the device
. The device reverts to
factory settings and the AP mode is activated.
(Green quickly flashing for 1sec, than Yellow blinks quickly)
Modbus/TCP
first steps
Search on the NETIO website the
AN27:
Modbus/TCP with NETIO 4x – Control and measure LAN
power sockets
www.netio-products.com