4
4) Select your network in the list of detected networks and press “Next”. (Figure 3)
5) Enter the password for the selected WiFi network. You may also change the
device name. If your network does not use the DHCP, unselect this option and
manually enter the IP address and other network parameters (for experts only).
Confirm by pressing “Next”. (Figure 4)
Figure 3
Figure 4
SN (serial number) on the label
----------
xx
24A42C3812
34
WiFi network:
PowerCable-AP-
xx
PowerCable-AP-
34
5
6) A page with the connection result is displayed. If it shows “WiFi status:
Connected“, check the network parameters and then click “Save&Connect” to
save the configuration. (Figure 5) The device then exits the AP mode, connects
to the selected WiFi network, and displays a network configuration summary
page. (Figure 6) WiFi connection is indicated with the yellow LED.
7) Connect your computer, tablet or smartphone to the same network where the
NETIO PowerCable is now connected and enter the device’s IP address (or use
the link at the summary page, see the previous step). If you haven’t noted the IP
address, you can use the
NETIO Discover
to find it, as described below.
8) After entering the address in a browser, the web administration login dialog
appears. The default username / password combination is
admin
/
admin
. After
a successful login, the web administration of the device appears. We recommend
changing the default username and password using the Users tab in the left-hand
menu.
9) Device web administration allows you to control the socket (Outputs tab), set up
M2M communication protocols (M2M API Protocols tab) and configure more
parameters (Settings tab). (Figure 7)
For details, see the user manual.
Figure 5
Figure 6
