1-1
v1.0, May 2009
Chapter 1
Configuring Your Internet Connection
This chapter describes how to configure your WNR3500v2 router Internet connection. When you
install your wireless router using the
Resource CD
as described in the
NETGEAR Router Setup
Manual,
these settings are configured automatically for you. This chapter provides instructions on
how to log in to the wireless router for further configuration.
This chapter includes the following sections:
•
“Using the Setup Manual”
•
“Logging In to Your Wireless Router” on page 1-2
•
“Using the Setup Wizard” on page 1-5
•
“Viewing or Manually Configuring Your ISP Settings” on page 1-5
Using the Setup Manual
For first-time installation of your wireless router, refer to the
NETGEAR Wireless Router Setup
Manual
. The
Setup Manual
explains how to launch the NETGEAR Smart Wizard on the
Resource
CD
to step you through the procedure to connect your router, modem, and computers. The Smart
Wizard will assist you in configuring your wireless settings and enabling wireless security for your
network. After initial configuration using the
Setup Manual
, you can use the information in this
User Manual
to configure additional features of your wireless router.
For installation instructions in a language other than English, refer to the language options on the
Resource CD
.
Note:
NETGEAR recommends using the Smart Wizard™ on the
Resource CD
for initial
configuration, as described in the
NETGEAR Wireless Router Setup Manual
.
