manualshive.com logo in svg

NETGEAR WNR2000v2 - Wireless- N 300 Router, User Manual

Share
Download
NETGEAR WNR2000v2 - Wireless- N 300 Router User Manual Download Page 7

v1.0, January 2010

vii

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s 
authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. For products available in the United 
States or Canadian markets, only channel 1~11 can be operated. Selection of other channels is not possible. This device 
and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

FCC Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment 
should be installed and operated with minimum distance of 20cm between the radiator and your body.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num

é

rique de la classe B conforme à la norme NMB-002 du Canada.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause undesired operation of the device.
For products available in the United States and Canadian markets, only channel 1~11 can be operated. Selection of other 
channels is not possible.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications

Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, 
building materials and construction, and network overhead, lower actual data throughput rate.

Product and Publication Details

Model Number:

WNR2000v2

Publication Date:

January 2010

Product Family:

Wireless Router

Product Name:

Wireless-N 300 Router Model WNR2000v2

Home or Business Product:

Home

Language:

English

Publication Part Number:

202-10485-01

Summary of Contents for WNR2000v2 - Wireless- N 300 Router

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands