manualshive.com logo in svg

NETGEAR WNCE2001 - Ethernet to Wireless Adapter, User Manual, Page: 9 / 25

Share
Download
NETGEAR WNCE2001 - Ethernet to Wireless Adapter User Manual Download Page 9

Universal WiFi Internet Adapter WNCE2001 User Manual

1-2

v1.0, April 2010

3.

Connect the WNCE2001 to power by either plugging it directly into a wall outlet, or by 
connecting it to any USB port using the included USB power cable. For more information on 
power connection options, see 

“Power Connection Options” on page 1-4

.

4.

Push the WPS button on the WNCE2001.

The WLAN LED will blink amber and green, showing that the WPS is running.

5.

Push the WPS button on your router. The WLAN LED on the WNCE2001 will stay green for 
5 seconds when the wireless connection has been established.

6.

Your installation is complete.

Installation without WPS

To install your WNCE2001 without WPS, do the following:

1.

Disconnect any wireless connection to the router and/or remove the Ethernet cable currently 
connected to the computer. (You may restore the connection after theWNCE2001 installation 
is complete.)

Figure 1-2

Summary of Contents for WNCE2001 - Ethernet to Wireless Adapter


























Reviews:

No comments