manualshive.com logo in svg

NETGEAR WNCE2001 - Ethernet to Wireless Adapter, User Manual, Page: 16 / 25

Share
Download
NETGEAR WNCE2001 - Ethernet to Wireless Adapter User Manual Download Page 16

Universal WiFi Internet Adapter WNCE2001 User Manual

2-4

v1.0, April 2010

Setting Up WEP Encryption Security

To configure WEP encryption security:

1.

Run the WNCE2001 Smart Wizard.

a.

Make sure that the WiFi Internet adapter is connected to the USB port in your computer.

b.

Use the 

 icon to open the Smart Wizard. The Settings tab displays.

2.

Configure the security settings. 

a.

In the 

Profile

 field, select the profile, or type in a profile name.

b.

In the 

Network Name (SSID)

 field, select the network, or enter the SSID.

c.

In the Security section, select 

WEP

.

3.

Select the WEP encryption strength you will use. 

•

64-bit WEP data encryption 

•

128-bit WEP data encryption

Note: 

You will not get a wireless network connection unless the network SSID 

matches exactly what is configured in the access point.

Figure 2-2

Note: 

Larger encryption keys require more processing and might slow the 

communications response times.

Summary of Contents for WNCE2001 - Ethernet to Wireless Adapter


























Reviews:

No comments