NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
Network Connections and Wireless Security
23
v1.0, April 2007
4.
Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b wireless devices.
5.
Save your settings in a Profile.
a.
Click Save Profile. All the configuration settings are saved in this profile.
b.
Click
Apply
.
c.
Click Close to exit the configuration utility.
Setting up WPA2-PSK Security
Follow the steps below to configure WPA2-PSK Security.
1.
Run the Wireless Adapter Smart Wizard.
a.
Make sure the software is installed and the Wireless Adapter is fully inserted in a USB
port in your computer.
b.
Use the
icon to open the Smart Wizard. The Settings tab page opens.
2.
Configure the Security settings.
a.
In the Profile box, select the profile or type in a profile name.
Note:
The characters are case sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
Figure 20
