Description
Setting
The contact name for SNMP management. This is an optional field for information
only.
Contact
The location for SNMP management. This is an optional field for information only.
Location
The community string that enables the SNMP management station to read the access
point’s MIB objects. The default is public.
Community Name
(Read Only)
The community string that enables the SNMP management station to read and write
the access point’s MIB objects. The default is private.
Community Name
(Read Write)
The port number at which the SNMP management station must receive traps. The
default is 162.
Port
The IP address of the SNMP management station that must receive traps.
IP Address
The community name that is associated with the IP address that must receive traps.
The default is public.
Community Name
7. Click the Apply button.
Your settings are saved and applied.
Enable SNMPv3 and manage the settings
You can enable SNMPv3 and manage the associated settings for the access point:
To enable SNMPv3 and manage the settings:
1. Launch a web browser from a computer or mobile device that is directly connected
over WiFi to the access point or connected to the same network as the access point.
2. Enter the IP address that is assigned to the access point.
If you are directly connected to the “CONFIG-ONLY” SSID, you can enter
https://www.aplogin.net.
A login window displays.
If you do not know the IP address, see Find the IP address of the access point on
page 33. For more information about the “CONFIG-ONLY” SSID, see 2.4 GHz
management SSID on page 58.
If your browser does not display a login window but displays a security message and
does not let you proceed, see Log in to the access point after you complete the initial
log-in process on page 35.
3. Enter the access point local device password and click the Login button.
User Manual
100
Maintain the access point
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
