To use the NETGEAR Insight mobile app to discover the access point in your
network:
1. On your iOS or Android mobile device, go to the app store, search for NETGEAR
Insight, and download and install the app.
2. Connect your mobile device to the access point WiFi network.
3. Open the NETGEAR Insight mobile app.
4. Tap LOG IN to log in to your existing NETGEAR account, which is the same account
that you logged into or created during the initial log-in process.
After you log in to your account, the IP address of the access point displays in the
device list.
5. Save the IP address for future use.
Log in to the access point after you complete
the initial log-in process
After you complete the initial log-in process, the access point is ready for use and you
can change the settings and monitor the traffic.
Depending on how you connect to the access point, when you enter
https://www.aplogin.net or the IP address that is assigned to the access point and
you use http, the browser automatically redirects your request to https. If you did not
yet install the access point’s security certificate, your browser might display a security
message. You can either ignore this message or install the security certificate. Consider
the following examples:
•
Google Chrome: If Google Chrome displays a
Your connection is not private
message, click the ADVANCED link. Then, click the Proceed to x.x.x.x (unsafe)
link, in which x.x.x.x represents the IP address of the switch.
•
Apple Safari: If Apple Safari displays a
This connection is not private
message, click
the Show Details button. Then, click the visit this website link. If a warning pop-up
window displays, click the Visit Website button. If another pop-up window displays
to let you confirm changes to your certificate trust settings, enter your Mac user name
and password and click the Update Setting button.
•
Mozilla Firefox: If Mozilla Firefox displays a
Your connection is not secure
message,
click the ADVANCED button. Then, click the Add Exception button. In the pop-up
window that displays, click the Confirm Security Exception button.
•
Microsoft Internet Explorer: If Microsoft Internet Explorer displays a
There is a
problem with this website’s security certificate
message, click the Continue to this
website (not recommended) link.
User Manual
35
Installation and Initial Log-in
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
