Installation Guide for the NETGEAR Dual Band Wireless PCI Adapter WAG311
Basic Setup
2-7
Verify wireless connectivity to your network.
a.
Open the WAG311 utility by clicking on the icon
in the Windows system tray.
b.
Verify that your connection information matches your wireless network.
c.
Verify connectivity to the Internet or network resources.
Note:
If you are unable to connect, see
“Basic Troubleshooting Tips” on page 2-14
.
Note:
When the Windows XP wireless
configuration utility is enabled (the
default), only these two tab pages
appear.
To enable the full Netgeart configuration
utility, open the network connections
from the system tray icon, click the
Properties button, click the Wireless
Networks tab and then clear the “Use
Windows to configure my wireless
network settings” check box. For
instructions on how to use the full
NETGEAR utility, see
“Understanding
the Configuration Options” on page 3-1
.
