Stora Hardware
15
NETGEAR Stora
LED and Connector Descriptions
The following table describes the function of Stora hardware components:
Item
Description
Power
button
•
Turn on Stora
. Press once.
•
Turn off Stora
. To correctly shut down your Stora, press and hold the
Power button for about 5 seconds. The blue light on the front panel blinks
before shutting off. If the unit is hung, press and hold the Power button to
force shutdown.
NOTE
: To save power, your Stora automatically goes into disk spin down
mode when not used for 12 minutes.
Power
LED
•
Solid blue
. Power is on.
•
Blinking blue
. The Stora is booting up or shutting down.
•
Not illuminated
. The system is powered off.
Disk 1:
Top LED
Disk 2:
Bottom
LED
•
On
. Disk is installed.
•
Solid green
. Drive is operating normally.
•
Blinking green
. Stora is booting up or shutting down. Also indicates
activity such as copying data.
•
Solid amber
. Drive is not ready; however, if the LED is solid amber
constantly, it indicates a problem with the drive. Try one or more of the
following troubleshooting tips:
- Check that cables are securely connected and power is on.
- Remove and then reinsert the disk.
- Turn off Stora and turn it on again to reboot the system.
•
Not illuminated
. No disk is installed.
USB port
Connect a USB drive and printer.
Ethernet
port and
LED
Ethernet connection LEDs:
•
Solid amber
. Indicates a 10/100M connection.
•
Solid green
.Indicates a 1G connection.
•
Blinking green
or
amber
. Indicates link activity.
Power
cable
socket
Plug the power cable into the Stora system.
Reset
button
Insert a paper clip or pen to reset Stora to its original factory default settings.
Can also be used when changing your password.
