To configure an IPTV port:
1. Launch a web browser from a computer or mobile device that is connected to the
network.
2. Enter
http://www.routerlogin.net
.
A login window opens.
3. Enter the router user name and password.
The user name is
admin
. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select
ADVANCED > Advanced Setup > VLAN/Bridge Settings
.
The VLAN/Bridge Settings page displays.
5. Select the
Enable VLAN/Bridge Setup
check box.
The page expands.
6. Select the
By bridge group
radio button.
The page expands.
7. Select a Wired Ports check box or a Wireless check box:
• Wired Ports
. If your device is connected to an Ethernet port on the router, select
the Wired Ports check box that corresponds to the Ethernet port on the router to
which the device is connected.
• Wireless
. If your device is connected to your router’s WiFi network, select the
Wireless check box that corresponds to the router’s WiFi network to which the
device is connected.
Note:
You must select at least one Wired Ports or Wireless check box. You can select
more than one check box.
8. Click the
Apply
button.
Your settings are saved.
Manage custom static routes
Typically, you do not need to add static routes unless you use multiple routers or multiple
IP subnets on your network.
User Manual
76
Manage Network Settings
Nighthawk AX2400 WiFi 6 Router
