Security
67
R6100 WiFi Router
If the Disable Port Triggering check box is selected after you configure port triggering,
port triggering is disabled. However, any port triggering configuration information that you
specified is saved even though it is not used.
4.
In the Port Triggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires. This is required because the router cannot be
sure when the application has terminated.
To add a port triggering service:
1.
On the Port Forwarding/Port Triggering screen, click the
Add Service
button.
2.
In the Service Name field, type a descriptive service name.
3.
In the Service User list, select
Any
, or select
Single address
and enter the IP address of
one computer.
•
Any
(the default), allows any computer on the Internet to use this service.
•
Single address
restricts the service to a particular computer.
4.
Select the service type, either
TCP
or
UDP
or
TCP/UDP
(both). If you are not sure, select
TCP/UDP.
5.
In the Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
6.
Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
7.
Click the
Apply
button.
The service appears in the Port Triggering Portmap Table.
8.
Make sure that you enable port triggering so that the service that you added will be used.
