background image

NetGear Print Server Manual 

 

Default Configuration 

Click "Yes" to confirm setting to factory defaults, or "No" to leave the current configuration 
unchanged. 

Printer Menu 

Individual printer ports are displayed as options under the Printer Menu, and a pop-up window opens 
when any of the printer ports are selected, as in the example below. 

 

Printer Status 

The printer ports not existing on the print server are shadowed or grayed out. 
On the popup window, you can check the connection status of the print server such as on-line, off-line, 
paper jam, and out-of-paper. Also on display is the printing information indicating if the print server is 
sending data to the printer or if the printer is idling. At the bottom of the screen are four buttons as 
described below. 

Printer Status

 

Field Description 

Configure Button  If the connected printer supports directional communication such as many of the new Hewlett-Packard 

LaserJet and DeskJet printers, you can click on this button to customize the various printing parameters 
of the printer. The pop-up window consists of a table with the following column headings: 

Environment Variable 

The configuration variables available on this printer. The list of printer configuration variables vary 
from printer to printer. 

Variable Value 

Displays the current setting. To change the Variable Value (if Read Only is NO) double- click the line 

79 

Summary of Contents for PS111W - Print Server - Parallel











































































































Reviews: