Wireless Point to Multi-Point Configuration
Access Point 1
Access Point 2
•
On Access Point 1, in the Wireless
Bridge Page, enable
Wireless
Bridinging and Repeating
and select
the option for
Wireless Point to
Multi-Point Bridge.
•
Enable as many profiles as you have
Access Points; each profile will
associate your central Access Point to
one of the remote Access Points.
•
Make note of the
MAC Adress of
Access Point 1:
•
On Access Point 2, in the Wireless
Bridge Page, enable
Wireless
Bridinging and Repeating
and select
the option for
Wireless Point to
Multi-Point Bridge.
•
Enable
one
profile to associate this
remote Access Point to the central
location.
•
Make note of the
MAC Adress of
Access Point 2:
Repeat the steps for Access Point 2 on each of the other Access Points, making sure you take
note of all the MAC Addresses.
Once you have gathered all the MAC addresses, and Wireless Briding and Repeating has been
enabled on all the Access Points, go back to Access Point 1 and select the first profile you
enabled. Click on the
Edit
button at the bottom of the screen to change the details of the profile:
❶
➋
➋
❶
