NETGEAR ProSafe WNAP320, Reference Manual

Page: 76 / 93

34 | Chapter 4. Advanced Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Configuring the WNAP320 for Client Mode
In Client mode the WNAP320 operates as a client bridge only and sends traffic to the
selected remote AP or peer device. To configure the WNAP320 for Client mode:
1.
Select
Configuration > Wireless Bridge > Bridging and Repeating
. The Bridging and
Repeating screen displays. See
Appendix 4
Figure 11.
Select the
Enable Wireless Bridgeing and Repeating
check box. This allows you to
select a bridging mode.
2.
Select
Client
. You can now enable the MAC Clone feature. The default is
Disable
. If you
enable the MAC Clone feature, enter the MAC Clone address. See
Figure 12,
.
3.
Click
Apply
.
Figure 12.