NETGEAR ProSafe WG102-500, Reference Manual

Page: 22 / 52

WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
2-6 Configuration
v1.0, February 2009
802.11 b/g Profile
Table 2-5 shows the 802.11b/g profile settings.
Advanced Settings
The advanced settings provides more options to fine-tune the parameters on the system to achieve
the optimal performance.
Figure 2-5
Table 2-5. 802.11b/g Profile Settings
Field Descriptions
Radio Policy This pulldown menu allows you to make one of the following selections:
•
802.11b/g . Also referred to as Mixed Mode. The wireless access point accepts
both 802.11b and 802.11g client association requests.
• 802.11b Only . The wireless access point accepts 802.11b client association
requests only.
• 802.11g Only . The wireless access point accepts 802.11g client association
requests only.
Country This pulldown menu allows you to specify the country/region.
RF Channel This pulldown menu allows you to specify the 802.11 channel. The available
options for 802.11b or 802.11g are from 1 to 11, and from 1 to 13 for the country
setting of Default (US) and Europe, respectively.
Tx Output Power This pulldown menu allows you to specify the transmission power. The available
options are from 27 dBm to 18 dBm. By default, the Tx Output Power is 20 dBm.
Note : Please make sure that you comply with the regulatory requirements for total
RF output power in your country.
Antenna Selection This menu selection applies only to outdoor antennas and is not applicable to the
WG102-500, WGAP150.
FullManual.book Page 6 Thursday, January 29, 2009 10:12 AM