Introduction
Thank you for purchasing the NETGEAR ANT24D18 antenna. This Installation Guide
provides installing instructions and guidelines for using the NETGEAR 18 dBi Patch Panel
Directional Antenna.
Package Contents
The package should contain the following items:
•
NETGEAR Indoor/Outdoor 18 dBi 2.4 ~ 2.5 GHz
Patch Panel Directional Antenna ANT24D18
•
2-meter low loss antenna cable to connect the antenna to a lightning arrestor
•
Lightning Arrestor
Note: a ground cable is not included but required for outdoor installation. The grounding
cable must be equivalent or better than: AWG 10, UL 1015, Stranded, 600 V, 105°C,
green or green/yellow insulation, 2 clip of 5.5 mm inner diameter cramped at both ends,
cable no longer than 5 meters.
•
Reverse N/SMA Adapter
Installation Guide, Warranty and
Support information card
Screws, bolts, washers,
and plastic anchors
18 dBi Patch Panel Directional
Antenna ANT24D18
2 brackets for adjustable positioning, 2 wall brackets,
2 indented brackets and 2 U-bolts
Lightning
arrestor
Reverse N/SMA
adapter
2-meter cable
1
