8
Secure Your Network
¾
To create a secure network:
1. Plug in your new adapters.
2. Wait until the Pick A Plug LEDs are blinking.
3. Press the
Security
button for two seconds, then press the
Security
button on one of the other adapters in your existing network for two
seconds. Both buttons must be pressed within two minutes.
Warning
: Do not press the
Security
button on the Powerline adapter until
installation is complete and the adapters are communicating with each
other (indicated by the blinking Pick A Plug LED). Pressing this button too
soon can temporarily disable Powerline communication. If this occurs, use
the
Factory Reset
button to return the Powerline adapter to its factory
default settings.
Note:
If, after creating a secure Powerline network, you want to add
another adapter, perform a factory reset on all of the adapters and then
perform this procedure.
Note:
The
Security
button does not work in power saving mode (see
Troubleshooting Tips
on page 10
).