manualshive.com logo in svg

NETGEAR Orbi Pro WiFi 6 AX6000, User Manual

The NETGEAR Orbi Pro WiFi 6 AX6000 is a cutting-edge wireless router that redefines connectivity. Unlock blazing-fast speeds and seamless coverage with its advanced technology. To explore all its features, don't forget to download the User Manual, absolutely free, from manualshive.com. Experience the future of networking at your fingertips.

Share
Download
background image

prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.

6. If already you set up your IPv4 ISP connection for PPPoE and want to use the same

login information for IPv6, select the Use the same Login information as IPv4
PPPoE check box.
To manually configure the PPPoE settings for IPv6, specify the following settings:

•

Login: Enter the login name that your ISP gave you. This is usually the name that
you use in your email address. For example, if your main mail account is
[email protected], you would type JerAB in this field. Some ISPs (like Earthlink)
require that you use your full email address when you log in. If your ISP requires
your full email address, type it in this field.

•

Password. Enter the password for the ISP connection.

•

Service Name (if Required). Enter a service name. If your ISP did not provide a
service name, leave this field blank.

Note: The default setting of the Connection Mode field is Always On to provide a
steady IPv6 connection. The router never terminates the connection. If the connection
is terminated, for example, when the modem is turned off, the router attempts to
reestablish the connection immediately after the PPPoE connection becomes available
again.

7. In the IPv6 Domain Name Server (DNS Address), select a radio button

•

Get Automatically from ISP: Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.

•

Use These DNS Servers: If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.

8. In the LAN Setup section, select an IP Address Assignment radio button:

•

Use DHCP Server: This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCPv6 client function.

•

Auto Config: This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your
business network (the LAN).

9. (Optional) Select the Use This Interface ID check box and specify the interface ID

that you want to be used for the IPv6 address of the router’s LAN interface.

User Manual

53

Specify Your Internet Settings

Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80

Summary of Contents for Orbi Pro WiFi 6 AX6000












































































































































































































































Reviews:

No comments

Related manuals for Orbi Pro WiFi 6 AX6000

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Brand: Canon Pages: 30
D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
D-Link DFL-M510 Faq preview
DFL-M510
Brand: D-Link Pages: 22
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
TDC Netopia User Manual preview
Netopia
Brand: TDC Pages: 27
Hama 53107 Operating Instruction preview
53107
Brand: Hama Pages: 10
Pakedge Device & Software X-Series Quick Start Manual preview
X-Series
Brand: Pakedge Device & Software Pages: 20
ZyXEL Communications P-974H - V3.70 Manual preview
P-974H - V3.70
Brand: ZyXEL Communications Pages: 116
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Brand: C&H Pages: 32
Tenda DH301 User Manual preview
DH301
Brand: Tenda Pages: 120
Sharedband Power Router 2 Configuration Manual preview
Power Router 2
Brand: Sharedband Pages: 3
ACTi GNR-410 Quick Installation Manual preview
GNR-410
Brand: ACTi Pages: 12
Intellinet 560665 User Manual preview
560665
Brand: Intellinet Pages: 32
ZyXEL Communications XGS4600 Series User Manual preview
XGS4600 Series
Brand: ZyXEL Communications Pages: 645
Valcom VIP-814 Installation Manual preview
VIP-814
Brand: Valcom Pages: 3

Brands by name

Popular brands

Load more brands