NETGEAR Nighthawk R7450 User Manual Download Page 59

Page: 59 / 156

The Address Reservation page displays.

7. Change the settings.

8. Click the Apply button.

Your settings are saved.

Delete a reserved IP address entry

To delete a reserved address entry:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Setup > LAN Setup.

The LAN Setup page displays.

5. Select the radio button next to the reserved address that you want to delete.

6. Click the Delete button.

The address is removed.

Use the WPS Wizard for WiFi connections

The WPS Wizard helps you add a WPS-enabled device to your WiFi network without
typing the WiFi password.

To use the WPS Wizard:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

User Manual

Manage Network Settings

Nighthawk AC2600 Smart WiFi Router Model R7450

Summary of Contents for Nighthawk R7450





























































































































































Search results

Summary of Contents for Nighthawk R7450

Reviews:

Related manuals for Nighthawk R7450

Brands by name

Popular brands

NETGEAR Nighthawk R7450, User Manual

Search results

Summary of Contents for Nighthawk R7450

Reviews:

Related manuals for Nighthawk R7450

Brands by name

Popular brands