NETGEAR Nighthawk AC2600 User Manual Download Page 39

Page: 39 / 164

Table 3. Common MTU sizes (Continued)

Application

MTU

Used in PPPoA environments.

1458

Used in PPTP environments or with VPN.

1436

Change the MTU Size

To change the MTU size:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter

http://www.routerlogin.net

A login window opens.

3. Enter the router admin user name and password.

The user name is

admin

. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select

ADVANCED > Setup > WAN Setup

The WAN Setup page displays.

5. In the

MTU Size

field, enter a value from 64 to 1500.

6. Click the

Apply

button.

Your settings are saved.

User Manual

Specify Your Internet Settings

Nighthawk AC2600 Smart WiFi Router Model AC2600

Summary of Contents for Nighthawk AC2600





































































































































































Search results

Summary of Contents for Nighthawk AC2600

Reviews:

NETGEAR Nighthawk AC2600, User Manual, Page: 39 / 164

Search results

Summary of Contents for Nighthawk AC2600

Reviews: