NETGEAR Nighthawk AC2600 User Manual Download Page 139

Page: 139 / 164

4. Click the

button.

Your settings are saved.

Change the Language for the NETGEAR USB Control
Center

To change the language:

1. Click the

NETGEAR USB Control Center

icon

2. Select

Tools > Configuration

The NETGEAR USB Control Center page displays.

3. From the

Language

menu, select a language.

4. Click the

button.

The next time NETGEAR USB Control Center starts, the language changes.

Specify the USB Control Center Time-Out

Specify the time-out to release the printer connection.

To specify the time-out:

1. Click the

NETGEAR USB Control Center

icon

2. Select

Tools > Configuration

The NETGEAR USB Control Center page displays.

3. In the

Timeout

field, type the number of minutes.

The time-out is the number of minutes that a computer holds its connection to the
printer when the connection isn’t being used.

4. Click the

button.

Your settings are saved.

User Manual

139

Share a USB Printer

Nighthawk AC2600 Smart WiFi Router Model AC2600

Summary of Contents for Nighthawk AC2600





































































































































































Search results

Summary of Contents for Nighthawk AC2600

Reviews:

NETGEAR Nighthawk AC2600, User Manual, Page: 139 / 164

Search results

Summary of Contents for Nighthawk AC2600

Reviews: