manualshive.com logo in svg

NETGEAR (LG2200D, User Manual

Share
Download
NETGEAR (LG2200D User Manual Download Page 21

Specify Your Internet Settings 

21

 U.S. Cellular® 4G LTE™ Router (LG2200D)

To change the SIM card PIN code:

1.

Launch an Internet browser from a computer or wireless device that is connected to the 
network.

2.

Enter 

http://www.routerlogin.net 

or 

http://www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

The BASIC Home screen displays.

4. 

Select 

ADVANCED > Advanced Setup > SIM Settings

.

5. 

In the Changing the PIN Code section of the screen, type your PIN in the Current PIN Code 
field.

6. 

In the New PIN Code field, type the new PIN.

7. 

In the Confirm new PIN Code field, type the new PIN again.

8. 

Click the 

Apply

 button.

Your changes are saved.

Summary of Contents for (LG2200D








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands