![NETGEAR HE102 - Wireless Access Point User Manual Download Page 7](http://html1.mh-extra.com/html/netgear/he102-wireless-access-point/he102-wireless-access-point_user-manual_1673670007.webp)
Preliminary
Access Point User’s Guide
•
Page 7
•
The console connector is only used for system configuration during
manufacturing process and should not be connected.
•
The RJ-45 Ethernet jack is provided for 10/100 Mbps connectivity to a wired
Ethernet LAN. The Ethernet jack is wired for direct connection to a Ethernet hub
or switch.
•
The restore to default push button is to allow the Access Point to be reset back to
the factory default condition in the event that the Access Point is no longer
accessible or controllable through its web-based interface.
•
A 3.3 V power supply is provided and is plugged into the power supply connector
of the AP.