GS700AT Smart Switch Software Administration Manual
Configuring Switching Settings
4-6
v1.0, October 2008
–
Static – The LAG is configured manually.
–
LACP – The LAG is configured automatically.
•
Speed
– Select the data transmission rate for the LAG. The LAG type determines what
speed setting options are available. The possible field values are:
–
10M – The LAG is currently operating at 10 Mbps.
–
100M – The LAG is currently operating at 100 Mbps.
–
1000M – The LAG is currently operating at 1000 Mbps.
•
Duplex Mode
– Displays the duplex mode of the LAG. The possible field value is:
–
Full – The interface supports transmission between the device and its link partner in
both directions simultaneously.
•
Auto Negotiation
– Select the auto negotiation status of the LAG. Auto Negotiation is a
protocol between two link partners that enables a port to advertise its transmission rate,
duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by
default. The possible field values are:
–
Enable – Enable auto negotiation.
–
Disable – Disable auto negotiation.
•
Flow Control
– Select the flow control status of the LAG. Operates when the LAG is in
full duplex mode. Flow Control is disabled by default. The possible field values are:
–
Enable – Enable flow control.
–
Disable – Disable flow control.
2.
Select the interface.
3.
Enter or modify the fields in the first row.
4.
Click
APPLY
to update the device.