GS700AT Smart Switch Software Administration Manual
Getting Started with Switch Management
1-4
v1.0, October 2008
5.
Click
Discover
for the Smart Wizard Discovery utility to find your GS700AT Gigabit Smart
Switch. You should see a screen similar to that shown below.
6.
Note the displayed IP address assigned by the DHCP server. You will need this value to access
the switch directly from a web browser (without using the Smart Wizard Discovery utility).
7.
Select your switch by highlighting the name of the switch. Then click
Web Access
. The
discovery utility displays a login window similar to the following:
8.
Use your web browser to manage your switch. The default password is
password
. Then use
this screen to proceed to management of the switch covered in
Chapter 2, “Introduction to the
Web Browser Interface”
.
Figure 1-1
Figure 1-2