To create a basic 802.1Q VLAN and assign ports as members:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The user name is
admin
. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select
SWITCHING
.
The QOS page displays.
5. From the menu on the left, select
VLAN
.
The VLAN page displays.
If you did not yet activate the Basic 802.1Q VLAN mode, see Activate the Basic
802.1Q VLAN mode on page 40.
By default, the
Port Configuration
tab is selected and the 802.1Q-BASED PORT
CONFIGURATION pane displays.
6. To add a VLAN and then assign ports as members of the VLAN, do the following:
a. Click the
Edit VLAN
button.
The 802.1Q-BASED VLAN CONFIGURATIONS (BASIC MODE) pane displays.
b. Click the
ADD VLAN
button.
The BASIC 802.1Q VLAN pop-up window opens.
c. In the
VLAN Name
field, enter a name from 1 to 14 characters.
d. In
VLAN ID
field, enter a number from 1 to 4093.
e. Click the
APPLY
button.
Your settings are saved. The new VLAN shows in the 802.1Q-BASED VLAN
CONFIGURATIONS (BASIC MODE) pane.
f. Click the
Port Configuration
tab.
The 802.1Q PORT CONFIGURATIONS pane displays
g. For each port that you want to make a member of the new VLAN, select the VLAN
from the
VLAN
menu for the individual port.
Note:
If ports are members of the same LAG, you must assign them to the same
VLAN.
User Manual
42
Use VLANS for Traffic
Segmentation
Gigabit Ethernet Smart Managed Plus Switches Series 3XXEP and 3XXEPP