
The EDIT RATE LIMITS page displays.
c. For each port for which you want to set rate limits, select the rate in Kbps or Mbps
from the individual
In Limits
and
Out Limits
menus for the port.
The default selection is No Limit.
d. Click the
APPLY
button.
Your settings are saved and the EDIT RATE LIMITS page closes.
Use 802.1P/DSCP quality of service
In the 802.1P/DSCP QoS mode, the switch uses the 802.1P or DSCP information in the
header of an incoming packet to prioritize the packet. With this type of QoS, you cannot
control the port prioritization on the switch because the device that sends the traffic
(that is, the packets) to the switch prioritizes the traffic. However, you can set the rate
limits for individual ports on the switch.
The switch accepts traffic on a port at the rate (the speed of the data transfer) that you
set for incoming traffic on that port. The switch transmits traffic from a port at the rate
that you set for outgoing traffic on that port. You can select each rate limit as a predefined
data transfer threshold from 512 Kbps to 512 Mbps.
To use 802.1P/DSCP QoS mode and set the rate limits for ports:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The user name is
admin
. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select
SWITCHING > QOS
.
The Quality of Service (QoS) page displays.
5. If the selection from the
QoS Mode
menu is
Port-based
, do the following to change
the selection to
802.1P/DSCP
:
a. From the
QoS Mode
menu, select
802.1P/DSCP
.
A pop-up warning window opens.
b. Click the
CONTINUE
button.
The pop-up window closes.
User Manual
24
Optimize the Switch
Performance
Gigabit Ethernet Smart Managed Plus Switches Series 3XXEP and 3XXEPP