Page 17 of 24
Figure 3-4. System Information.
5. The login name is “admin”. And there is no password assigned. We strongly recommend you enable
password for secure admin access to the switch management function. After successful login, the
screen should show the (FSM7352PS)> prompt. Enter “show sysinfo” to display the management
CPU’s IP address. The switch is shipped with DHCP as default to receive its IP address, to manually
set a static IP address for the management VLAN, you must first disable DHCP as follows:
(FSM7352PS) > en
Password: <just hit enter>
(FSM7352PS)# network protocol none
Changing protocol mode will reset ip configuration.
Are you sure you want to continue? (y/n)y
After system prompt return, enter the following command
(FSM7352PS) # network parms 192.168.1.100 255.255.255.0 192.168.1.1
NOTE: This assigns an IP address to the switch in the management VLAN. The management VLAN is a
