Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide
Introduction
1-3
v1.0, November 2008
Rear Panel
The rear panel has a console port and a standard AC power receptacle for the supplied power cord.
Power receptacle
Console port
Figure 2
Safety Instructions
Use the following safety guidelines to ensure your own personal safety and to help protect your
system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the
following precautions:
•
Observe and follow service markings.
–
Do not service any product except as explained in your system documentation.
–
Opening or removing covers that are marked with the triangular symbol with a lightning
bolt could expose you to electrical shock. Only a trained service technician should service
components inside these compartments.
•
If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part, or contact your trained service provider:
–
The power cable, extension cable, or plug is damaged.
–
An object has fallen into the product.
–
The product has been exposed to water.
–
The product has been dropped or damaged.
–
The product does not operate correctly when you follow the operating instructions.
•
Keep your system away from radiators and heat sources. Also, do not block cooling vents.
•
Do not spill food or liquids on your system components, and never operate the product in a wet
environment. If the system gets wet, contact your trained service provider.