manualshive.com logo in svg

NETGEAR FS700TS, Hardware Installation Manual, Page: 4 / 39

Share
Download
NETGEAR FS700TS Hardware Installation Manual Download Page 4

v1.0, October 2007

iv

•

Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected

•

Consult the dealer or an experienced radio/TV technician for help.

Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate 
the equipment.

D

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (

FS700TS Smart Switch with Gigabit Ports

) does not exceed the Class B limits for radio-

noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of 
Communications.

Product and Publication Details

Model Number:

FS700TS

Publication Date:

October 2007

Product Family:

Smart Switch

Product Name:

FS700TS Smart Switch

Home or Business Product:

Business

Language:

English

Publication Part Number:

202-10333-01

Publication Version Number:

1.0

FOR HOME OR OFFICE USE

Tested to Comply
with FCC Standards

 

 FS700TS Smart Switch with Gigabit Ports 

Summary of Contents for FS700TS








































Reviews:

No comments