manualshive.com logo in svg

NETGEAR FS562, Installation Manual, Page: 31 / 50

Share
Download
NETGEAR FS562 Installation Manual Download Page 31

Installation Guide for the Model FS562 and Model FS566 Fiber Switches

Installation

4-3

 

Installing the Switch in a Rack

For mounting the switch in a standard 19-inch rack, you need the following tools and materials:

•

Two mounting brackets supplied from the Rack Mount Kit

•

Eight screws supplied from the Rack Mount Kit to attach the mounting brackets to the switch

•

Four screws and nylon washers supplied from the Rack Mount Kit to attach the mounting 
brackets to the rack

•

#1 Phillips screwdriver

•

#2 Phillips screwdriver

To install the switch in a rack:

1.

Attach the mounting brackets to the sides of the switch as illustrated in 

Figure 4-1

.

Hold a mounting bracket against each side of the switch and align the countersunk screw holes 
in the bracket with the bracket mounting holes in the switch.

2.

Insert the screws provided in the Rack Mount Kit through each bracket and into the 
bracket mounting holes in the switch.

3.

Using a #1 Phillips screwdriver, tighten the screws to secure each bracket.

4.

Hold the switch with the mounting holes in the brackets aligned with the holes in the 
rack.

Figure 4-1.

Attaching Mounting Brackets to the Model FS562/FS566 Switch

5.

Insert two pan-head screws with nylon washers through each bracket and into the rack.

6.

Using a #2 Phillips screwdriver, tighten the screws to secure the switch to the rack.

8242FB

Summary of Contents for FS562



















































Reviews:

No comments