NETGEAR FS518T FS518T FS518T, Installation Manual

Page: 30 / 48

Installation Guide for the Model FS518 Fast Ethernet Switch
4-4 Installation
4.
Hold the switch with the mounting holes in the brackets aligned with the holes in the
rack.
Figure 4-1. Attaching Mounting Brackets to the Model FS518 Switch
5.
Insert two pan-head screws with nylon washers through each bracket and into the rack.
6.
Using a #2 Phillips screwdriver, tighten the screws to secure the switch to the rack.
For proper ventilation, make sure that the switch has at least 2 inches of space on each side and
5 inches of space at the back. It is very important that the fans located in the rear panel are not
blocked.
To connect additional switches or other devices, refer to “Connecting Devices to the Switch .”
Caution: Restricted airflow could cause overheating of the components.
8945FA