NETGEAR EX6200v2 User Manual Download Page 8

Page: 8 / 76

Get to Know Your Extender

AC1200 WiFi Range Extender

The following table describes the LEDs.

Table 1. Front panel LEDs

LED

Description

Green

. The 2.4 GHz WiFi connection between the extender and the

WiFi router is optimum.

Amber

. The 2.4 GHz WiFi connection between the extender and the

WiFi router is good.

Red

. The 2.4 GHz WiFi connection between the extender and the WiFi

router is poor.

Off

. The extender and the WiFi router are not connected over the 2.4

GHz band.

Green

. The 5 GHz WiFi connection between the extender and the WiFi

router is optimum.

Amber

. The 5 GHz WiFi connection between the extender and the WiFi

router is good.

Red

. The 5 GHz WiFi connection between the extender and the WiFi

router is poor.

Off

. The extender and the WiFi router are not connected over the

5 GHz band.

LAN (1 through 5)

Green

. An Ethernet device is connected to the LAN port.

Off

. No Ethernet device is connected to the LAN port.

Device to Extender

Green

. The extender is connected to a WiFi-enabled computer or

mobile device.

Amber

. The extender firmware is updating.

Off

. The extender is not connected to a WiFi-enabled computer or

mobile device.

USB

Solid green

. A USB device is connected to the USB port.

Off

. No USB device is connected to the USB port.

2.4GHz Link Rate

5GHz Link Rate

Summary of Contents for EX6200v2













































































Search results

Summary of Contents for EX6200v2

Reviews:

Related manuals for EX6200v2

Brands by name

Popular brands

NETGEAR EX6200v2, User Manual

Search results

Summary of Contents for EX6200v2

Reviews:

Related manuals for EX6200v2

Brands by name

Popular brands