NETGEAR EDA 500 Hardware Manual Download Page 120

Page: 120 / 124

Defaults and Technical Specifications

120

ReadyNAS OS 6 Desktop Storage Systems

Physical dimensions (h x w x d):

•

259 x 192 x 287.5 mm (10.20 x 7.56 x 11.32 in.)

Physical weight:

•

8.00 kg (17.60 lb) without disks

Power consumption:

•

BTU at full power supply utilization: 153.54 W

•

In operation: 87.69 W

•

Power off (Wake On LAN): 798.08 mW

•

Power off: 416.77 mW

Electrical:

•

Internal 200 W server-rated AC power supply

•

Input: 100–240VAC, 50/60 Hz

Environmental requirements:

•

Operating temperature: 0 to 40°C (32° to 104°F)

•

Operating humidity: 20 to 80% relative humidity (non-condensing)

•

Storage temperature: –20 to 70°C (–4 to 158°F)

•

Storage humidity: 5 to 95% relative humidity (non-condensing)

•

Software-controlled 120 mm chassis cooling fan

Certifications:

•

FCC Class B, CE Class B, RoHS, VCCI Class B

ReadyNAS 716X Technical Specifications

The ReadyNAS 716X storage system meets the following technical specifications:

General:

•

Intel Xeon processor E3-1265L v2 CPU

•

16 GB ECC memory

•

Six-bay storage

•

Three eSATA ports

•

One HDMI port

•

One USB 2.0 port (front)

Summary of Contents for EDA 500





























































































































Search results

Summary of Contents for EDA 500

Reviews:

Related manuals for EDA 500

Brands by name

Popular brands

NETGEAR EDA 500, Hardware Manual

Search results

Summary of Contents for EDA 500

Reviews:

Related manuals for EDA 500

Brands by name

Popular brands