NETGEAR EDA 500 Hardware Manual Download Page 116

Page: 116 / 124

Defaults and Technical Specifications

116

ReadyNAS OS 6 Desktop Storage Systems

•

Storage temperature: –20 to 70°C (–4 to 158°F)

•

Storage humidity: 5 to 95% relative humidity (non-condensing)

•

Software-controlled 92 mm chassis cooling fan

Certifications:

•

FCC Class B, CE Class B, RoHS, VCCI Class B, CCC

ReadyNAS 312 Technical Specifications

The ReadyNAS 312 storage system meets the following technical specifications:

General:

•

Intel Atom 2.1 GHz Dual Core CPU

•

2 GB memory

•

Two-bay storage

•

One eSATA port

•

One HDMI port (not currently supported)

•

One USB 2.0 port (front)

•

Two USB 3.0 ports (back)

•

Two LAN ports

•

Infrared remote receiver

Physical dimensions (h x w x d):

•

142 x 101 x 220 mm (5.60 x 3.98 x 8.70 in.)

Physical weight:

•

2.22 kg (4.89 lb) without disks

Power consumption:

•

BTU at full power supply utilization: 50.58 W

•

In operation: 34.92 W

•

Power off (Wake On LAN): 627.07 mW

•

Power off: 266.61 mW

Electrical:

•

External 60 W (12V, 5A) AC power supply

•

Input: 100–240VAC, 50/60 Hz

Summary of Contents for EDA 500





























































































































Search results

Summary of Contents for EDA 500

Reviews:

Related manuals for EDA 500

Brands by name

Popular brands

NETGEAR EDA 500, Hardware Manual

Search results

Summary of Contents for EDA 500

Reviews:

Related manuals for EDA 500

Brands by name

Popular brands